Intelligent Charger Group Control for PV-Storage-Charging Station

Jul 01, 2026

Leave a message

1. How the Control System Works

EMS and Charger Group Control Coordination

The energy management system, or EMS, acts as the station's central control platform. It continuously monitors key operating data, including transformer loading, PV output, battery state of charge, charger utilisation and grid-side power demand.

When the total charging load approaches a predefined site limit, the EMS communicates with the charger group control system and activates a flexible dispatch strategy. Instead of allowing all chargers to operate independently at maximum output, the system coordinates power allocation across the site.

Dynamic Power Allocation and Charging Priority

During periods of limited available capacity, charging power can be distributed according to predefined priorities.

For example, the system may maintain higher power availability for ultra-fast charging terminals while temporarily limiting output from lower-priority chargers or managing vehicle charging sequences. This helps prevent transformer overload while maintaining service quality for priority charging demand.

The exact priority logic can be configured according to the station's operating model, such as public fast charging, fleet charging, highway charging, logistics operations or commercial destination charging.

Fast Storage Support and Power Balancing

When PV generation drops suddenly or charging demand rises sharply, battery storage can provide rapid power support, subject to the PCS response capability and the battery system's operating limits.

At the same time, the EMS can adjust charger power allocation to keep total site demand within the permitted grid connection capacity. This coordinated response helps reduce abrupt load fluctuations and supports a smoother charging experience for vehicles already connected to the station.

Intelligent Charger Group Control for PV-Storage-Charging Station



2. Key Challenges Addressed

Managing the Impact of High-Power Charging Loads

As charging power levels increase, simultaneous operation of several DC fast chargers can create large and highly variable load peaks.

A single ultra-fast charging point may require several hundred kilowatts, depending on the charger design, vehicle voltage platform and battery acceptance capability. When multiple vehicles charge at the same time, the station load can approach or exceed the capacity of its transformer or grid connection.

Flexible charging control helps address this issue by sharing the available power pool across multiple charging terminals. Combined with battery storage, it can reduce the need to size grid infrastructure solely around infrequent peak demand.

This does not eliminate the need for proper electrical design or grid assessment. However, it can improve the effective utilisation of installed transformer capacity and may reduce the scale or timing of upstream grid reinforcement, depending on local tariffs, load profiles and utility requirements.

Reducing Peak Demand on the Grid

Battery storage and controlled charging can work together to reduce short-duration demand spikes.

During periods of lower site demand or higher PV output, the battery system can be charged. During charging peaks, it can discharge to supplement grid supply. Meanwhile, the charger group control system can adjust charging output across connected vehicles.

This coordinated approach supports peak shaving, improves load smoothness and helps charging stations interact with the grid in a more predictable way.


3. Operational Benefits and Future Applications

Better Charging Experience and Higher Asset Utilisation

For drivers, intelligent power management can help reduce the risk of service disruption during busy periods. Instead of allowing site capacity to be exceeded and triggering protection trips, the station can continue operating within defined electrical limits.

For operators, flexible control improves the utilisation of charging equipment, grid capacity and storage assets. It can also support phased station expansion, allowing more charging terminals to be added without immediately increasing transformer capacity to match the theoretical maximum simultaneous load.

The practical outcome depends on the station's charging pattern, customer dwell time, tariff structure, battery size and local grid capacity. In high-throughput locations such as highway service areas, logistics hubs and urban charging centres, the value of coordinated power management can be particularly significant.

Integration with Virtual Power Plants

The same control capability can also support participation in virtual power plant, or VPP, programmes.

A VPP aggregates flexible energy assets-such as battery storage, PV systems, EV chargers and controllable loads-and manages them as a coordinated resource. During grid peak periods, participating charging stations may reduce charger output, shift flexible charging demand or dispatch battery storage in response to grid signals.

A recent Changzhou pilot demonstrated this type of coordinated charging response, with selected high-power charging loads being adjusted during peak periods while priority charging demand was maintained.

For charging-station operators, this can create additional value streams where local market rules allow, including demand-response payments, peak-load management savings and improved utilisation of on-site energy assets.