Product: H-Series Smart AC Charging Wallbox
Rated power options: 7.4kW / 11kW / 22kW
Nominal supply: 230V AC ±15% / 400V AC ±15%
Supply connection: Single-phase or three-phase, depending on model
Input frequency: 50Hz / 60Hz
Adjustable current: 6–32A via app, within the selected model rating
Charging connection: Type 2 socket or 5m fixed cable
Startup modes: RFID card / App / Plug & Play
Communication: Bluetooth / WiFi / RS485 / P1 / TIC / CAN; 4G optional
Network protocol: OCPP 1.6 JSON
Solar-compatible charging modes: ECO / ECO+ / Fast
Load balancing: Up to 6 units via CAN or 16 units via WiFi
Energy metering: Built-in meter with approximately 1% reading accuracy
Fault-current protection: Built-in 6mA DC protection; external Type A RCD breaker required
Additional protection: Built-in Open-PEN fault detection
Enclosure protection: IP54 socketed / IP65 tethered; IK10 impact rating
Housing material: PC+ASA, UL94 V-0
Mounting options: Wall or pedestal mounting
Operating temperature: −30°C to +50°C
Operating humidity: 5%–98%, non-condensing
Send Inquiry
Description
Technical Parameters
H-SERIES
SMART AC CHARGING · HOME & COMMERCIAL
H-Series Smart AC Charging Wallbox
POWER OPTIONS
7.4 / 11 / 22kW
COMPACT FORMAT
260 × 260 × 100mm
NETWORK PROTOCOL
OCPP 1.6 JSON
VEHICLE CONNECTION
Type 2
01 / EVERYDAY CHARGING
Designed around the way you park
The H-Series is a compact smart AC wallbox for homes and commercial properties. Socketed and tethered formats, wall or pedestal mounting, and connected charging controls make it adaptable to private driveways, workplaces and apartment parking. Schedule charging around your routine, manage access and coordinate charging demand with the available electrical supply.
01
Start your way
Choose app control, RFID access or Plug & Play to suit the installation and user group.
02
Charge on your schedule
Off-peak scheduling helps align charging sessions with your electricity tariff and vehicle availability.
03
Share available power
Dynamic load management supports coordinated charging across multiple wallboxes.
04
Connect with solar
ECO, ECO+ and Fast modes provide solar-compatible charging options for the configured installation.
05
Stay connected
Bluetooth, WiFi and optional 4G support local control and connected operation.
06
Monitor your energy
An integrated energy meter provides charging-energy readings with approximately 1% accuracy.
02 / CHOOSE YOUR FORMAT
One family. Two connection styles.
Socketed
Type 2 female socket with electronic locking; permanent locking is supported. IP54 enclosure; approximately 5kg.
Tethered
5m fixed cable for convenient everyday connection. IP65 enclosure; approximately 7.5kg.
Mounting choices
Wall mounting or pedestal mounting to suit parking-space layout.
Housing
PC+ASA enclosure with UL94 V-0 material flammability classification and IK10 impact rating.
03 / SMART CONTROL
Connected to your energy routine
01
App-based operation
Manage charging and adjust current through the app. The H-Series brochure features HCharger and Monta app interfaces.
02
Multi-charger coordination
Load balancing supports up to 6 units via CAN or 16 units via WiFi.
03
Charging-network integration
OCPP 1.6 JSON supports integration with compatible charging-management platforms.
04 / CHARGING SOLUTIONS
At home. At work. Across shared spaces.
Home charging
A wall-mounted charger keeps everyday charging close to your parking space. App scheduling and solar-compatible modes support a routine tailored to your home energy use.
Workplace and shared parking
Pedestal mounting and connected access support parking areas where several drivers use the charging infrastructure. Load balancing helps coordinate the configured group of chargers.
Additional applications include commercial buildings and apartment blocks, with the access method, charger count and network configuration selected for the property.
05 / TECHNICAL DETAILS
specifications
Rated power
7.4kW / 11kW / 22kW
Supply and connection
230Vac ±15% / 400Vac ±15%; 1P+N+PE / 3P+N+PE
AC input frequency
50Hz / 60Hz
Adjustable current
6–32A via app, within the selected model rating
Fault-current protection
Built-in 6mA DC protection; an external Type A RCD breaker is required
Open-PEN detection
Built-in Open-PEN fault detection
Integrated protections
Overvoltage, undervoltage, power overload, short circuit, leakage current, missing earth connection, surge and overtemperature
Connectivity
Bluetooth / WiFi / RS485 / optional 4G / P1 port / TIC / CAN
Access and platform protocol
RFID / app / Plug & Play; OCPP 1.6 JSON
Solar-compatible modes
ECO / ECO+ / Fast
Load balancing
Up to 6 units via CAN; up to 16 units via WiFi
Installation networks
TN / IT / TT
Supply conductors
6–10mm²
Supply cable entry
Ø18–24mm entry through the enclosure bottom
Enclosure material
PC+ASA, UL94 V-0
Mounting
Wall / pedestal
Socket
IEC 62196 Type 2 female socket with electronic lock
Tethered cable
5m fixed cable
Enclosure and impact ratings
IP54 socketed / IP65 tethered; IK10
Energy metering
Integrated meter; approximately 1% reading accuracy
Operating temperature
−30°C to +50°C
Humidity
5%–98%, non-condensing
Installation location
Indoor / outdoor
Dimensions (H × W × D)
260 × 260 × 100mm
Weight
Socketed: 5kg / Tethered: 7.5kg
06 / DOCUMENTED TESTING
Certificates and test evidence
CB Test Certificate
JPTUV-153639 · IEC 61851-1:2017, supported by test report CN23ZB22 001.
EU RED Conformity Assessment
AK 50550090 0001 · Report CN22R7F1 001 and its standard list address the H-Series radio-equipment assessment.
UK Radio Equipment Assessment
AW 50550501 0001 · Conformity assessment under the Radio Equipment Regulations .
The UK conformity document states that use of the UKCA mark depends on completion of the applicable requirements and UK Declaration of Conformity. Certificate and report coverage does not extend automatically to a different brand, construction or configuration.
Electrical safety
CN23ZB22 001: CB Scheme testing to IEC 61851-1:2017. CN22J39Z 001: IEC 61851-1:2017 and EN IEC 61851-1:2019 .
CN22XA7Z 001: Pass result against the listed EMC standards, including EN IEC 61851-21-2:2021. Testing includes emissions and applicable immunity checks.
Radio and RF exposure
CN22EWAI 001–006 cover the listed radio EMC, GSM, LTE, RFID, 2.4GHz radio and RF-exposure assessments. Scope follows each report and tested configuration.
07 / INSTALLATION & OWNERSHIP
A clear path from selection to daily use
01
Match power to the property
Select the power rating and supply arrangement for the site and vehicle. Charging speed also depends on the vehicle's onboard AC charger.
02
Plan electrical protection
Built-in 6mA DC protection does not replace the specified external Type A RCD breaker. Installation should follow the model instructions and site design.
03
Configure shared charging
Define charger count, network method and any external metering or control accessories needed for load management and solar operation.
04
Keep service straightforward
The layered maintenance design supports access for service and replacement. Routine care includes cable, socket, housing and status-indicator inspection.
08 / FREQUENTLY ASKED QUESTIONS
Before you choose
Is every H-Series charger rated at 22kW?
No. The family offers 7.4kW, 11kW and 22kW models. Actual charging power depends on the selected unit, installation and vehicle.
Is 4G standard?
4G is optional. Select the connectivity configuration for your installation.
Do both versions have the same IP rating?
No. The socketed version is IP54 and the tethered version is IP65.
Is an external RCD still required?
Yes. The datasheet specifies an external Type A RCD breaker alongside built-in 6mA DC protection.
Does the integrated meter provide certified billing?
The specified reading accuracy is approximately 1%. Revenue-metering requirements should be matched to the project; no MID certification is stated here.
Find your H-Series configuration
Share your destination market, electrical supply, preferred socket or cable format, charger quantity and connectivity needs. SINELINK can support model selection and quotation.
Specifications and options depend on the ordered configuration. Product illustrations show the H-Series configurations presented in the product literature.
